Long axis kind the CNC Turning of the spare parts machines process designing

  • Time:
  • Click:131
  • source:MARSTEN CNC Machining
Process designing of CNC Turning of graph long axis is right 4<- the axis of L/D <10 kind spare parts, clip must be done to hold with chuck in the one aspect of the matter of workpiece, the installation method ability that carries close workpiece on the head with vivid tip in tail end assures the on the rails that CNC Turning machines. If plan institute is shown,grow axial workpiece for a kind, workpiece origin setting is in left end panel, program of car of fine of its numerical control writes as follows: 00016 NO G50140 of number of program of 00016(outside Turning) ／ .

Z360.

0; ／ installs Ding Jianyuan to nod in N1G30u0w0 of left end panel; ／ answers N2G50S1500T010l M08 of the 2nd reference point directly; ／ restricts rotate speed of highest main shaft to be 1500r ／ Min, move ／ of N3G96S200M03; of 01 cutting tool to appoint constant cutting speed to be 200m/min N4G0063.

0Z303.

O; ／ takes external cause thick car quickly only then dot (63.

0, 303.

0) N6G42G01x60.

0Z300.

0F0.

15; ／ moves compensation of radius of point of a knife, right slant, be close to workpiece N8G02X60.

O Z250.

0R36.

0; N10Z200 of circular arc of ／ car R36mm.

0; 60mm of ／ car Φ is sunken outside round face N12X98.

O Z170.

0; Φ of 60mm of ／ car Φ 98 cone N14Z140.

O; N16X60 of face of the circle outside 98mm of ／ car Φ .

0Z 110.

0; 98 Φ of ／ car Φ 60 cone N18Z30.

0; / N20102 of face of the circle outside car 98mm.

O; ／ O car needs 100nun step N22G40 G00140.

0z360.

0M09; ／ cancels a knife to fill, take a place quickly (140.

0, 360.

0) N24G30U0W0M05; / return N26M30 of the 2nd reference point; / the program ends CNC Milling