The design of prejudicial structure in bearing milling machine tool

  • Time:
  • Click:134
  • source:MARSTEN CNC Machining
In the section treatment of reducer housing, gai Daping face and fixed position of the craft that get bore with a reamer sell reducer of the 1st paragraph of mill on transfer matic installed surface of lid of bearing of aperture, treatment and screw; the two countershaft of thick, semifinishing machining on the 2nd paragraph of transfer matic bear; of aperture and installing hole of tube of two end rod. All fronts productivity is 120 / H. First the installed surface of milling bearing lid, bearing hole that drills Huo of screw, thick, half essence, essence to install active bevel gear, fixed position that get bore with a reamer sells installed surface of reducer of aperture, mill. Huo of essence of life installs difference fast implement the two bearing aperture that the two bearing Kong He of assembly installs active bevel gear. Used on the machine tool raise a pace to enter conveyor mixes type to install tripper automatically. The main characteristic of bed of these two special agitate is to use head of agitate of a vertical and a horizontal to clang the head is in the agitate in holding clip gives this to be opposite perpendicular the bearing aperture that intersect, ensured the positional precision of two aperture. In the Huo lever of vertical anxiety head jacket has distinctive prejudicial orgnaization, can make radial feed. Agitate lever makes up 3 razor blade, ordinal Huo cuts the end panel inside 3 installs active bevel gear bearing Kong Jiji of same axes, horizontal the head used rod of agitate of a hard alloy ordinal lock outfit is poor fast implement the two bearing aperture of assembly. After aperture of agitate of essence of life, workpiece pushs terminus automatically, classics after cleaning, send to assembly line. The wide choice that assembly machines unripe thread automatically to finish final drive carapace and bearing lid assembly end panel of aperture, car, bore, pour the working procedure such as horn, tap. Because be in what machine on this line,be assembly, the partial process of other, if technology tool reference plane, big flange is planar,reach two fixed position to sell the online already peripheral such as aperture to be finished fully. CNC Milling